LG WT17BSS6H Manual Del Propietário página 27

Steam (for steam models)
• Press the Steam button to use steam.
• Steam is automatically selected under the
Allergy Care programme.
Onda Fuerte (Strong Wave) (for
non-steam models)
• Press the Onda Fuerte button to control water
wave.
• Initially set at "medium" but will not be
indicated. To control wave power, press the
Onda Fuerte button.
Diferir Tiempo de Lavado (Time
Delay)
• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
1
Press the ENCENDIDO/APAGADO button.
2
Select a washing programme.
3
Press the Diferir Tiempo de Lavado button
to set the required Delay time.
4
Press the INICIO/PAUSA button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours. The Time Delay
cannot be set for less than 3 hours.
• To cancel the Time Delay function, press
Diferir Tiempo de Lavado button repeatedly
until the reservation is canceled or press the
ENCENDIDO/APAGADO button to turn off
and on power.
26
Turbo Wash™
• Press the Turbo Wash™ button to save time
and energy by jet spray technology.
Remojo (Soak)
• Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
• When the soak is activated, the
illuminates.
• To activate the Soak option, press and hold
the Turbo Wash™ button for 3 seconds.
• To change the soak time on the display or
deactivate the Soak option, press the Turbo
Wash™ button while the Soak option is
activated.
NOTE
• While the Turbo Wash option is activated, the
Soak option can not be set even if the Turbo
Wash™ button is pressed for 3 seconds.
Lavado Caliente / Lavado Frío
(Hot Wash / Cold Wash)
• Press the Lavado Caliente and Lavado Frío
buttons to select hot water, cold water, or hot
and cold water.
• If hot wash is selected, laundry will be done
with hot water and rinse will be done with cold
water.
• Hot and cold water makes appropriate
temperature by mixing them adequately when
both Hot water and cold water are selected.
• Stain care and Allergy Care programmes have
higher set temperature. So they use more hot
water than other programmes.
• Both Hot Wash and Cold Wash are
automatically selected under Allergy Care,
Smart Rinse and Tub clean courses.
EN
icon