Front Runner FALD008 Manual De Instrucciones página 6

5 RACK FITMENT ON VEHICLE WITHOUT OEM RAILS
2.1
2.4
5.1
Refer to RRSTUNI when assembling your Slimline II Tray.
5.2
5.3
2.2
5.4
Center the rack and tighten fully. Use M8 Nut Caps (Items 14) to finish off the nuts.
FALD008_REV _A02
4MM
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 11,
15 & 16) as shown.
13mm
6 © 2020 FRONT RUNNER VEHICLE OUTFITTERS