Front Runner FALD007 Manual De Instrucciones página 4

3 FIT AND SECURE
2.1
2.4
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
3.2
3.3
2.2
3.4
Center the rack and tighten fully. Use M8 nut caps (Items 3) to finish off the nuts.
FALD007_REV_A01
4
4MM
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 7, 8
& 9).
13mm
4 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS