Front Runner FALD006 Instrucciones De Montaje página 3

2 FIT AND SECURE
2.1
2.2
2.3
FALD006_REV_A00
Before starting the fitment you need to
remove the front and rear Ditch Covers
from the vehicle's roof using a medium
flat screw driver.
Take care not to damage the vehicle's
paint work.
Place the Front and Rear Ditch Cover
Plates (Items 15 and 16) into the cavities
where you removed the front and rear
ditch covers.
Join the Front LH and Rear LH Foot Rail
(Items 1 & 2) with the Joiner Plate
(Item 4) using M6 x 16 Buttom Head
Bolts, M6 x 12 x 1SS Flat Washers and
4mm
M6 Nyloc Nuts (Items 3, 5 & 6).
Place M6 Nut Caps (Item 7) on all the
Nyloc Nuts.
Repeat this for the Front RH and Rear RH
Foot Rail.
10mm
3 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
13mm