HP LaserJet Pro 4001ne Guía De Configuración página 4

2
Connect printer
to network
hpsmart.com/setup
i.
Go to hpsmart.com/setup on a computer to set up the new printer with
EN
HP Easy Start software.
ii.
When prompted choose Ethernet, then use an Ethernet cable to connect the printer
to the same network as the computer.
Note: If the software cannot locate the printer on the network, enter the printer's IP
address manually in the software. With hpsmart.com/setup on the printer screen,
press OK. The IP address displays on the printer screen.
iii.
Continue with the steps in the software to add the printer to the network.
4
Connectez l'imprimante
au réseau
Do not use a USB cable for setup. See Reference Guide for
EN
more information.
N'utilisez pas de câble USB pour la configuration. Consultez
FR
le Guide de référence pour plus d'informations.
No emplee un cable USB para la configuración. Consulte la
ES
Guía de referencia para obtener más información.
Conecte la impresora
a la red