Blackstone 2086 Manual De Instrucciones página 10

Owner's Manual |
!
WA R N I N G
e The manufacturer has made
y every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
. noted in these instructions.
Wear protective gloves if
necessary.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
06 blackstoneproducts.com/support
Assembly Guide
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Ensure
nents with care to avoid
that all plastic packing material and any transit protection is removed
accidental injury.
before assembling.
Some parts may contain
Find a large, clean area to assemble your unit. Please refer to the parts list and
sharp edges, especially as
assembly diagrams as necessary.
noted in these instructions.
Wear protective gloves if
S T E P 0 1
necessary.
another person, remove the
griddle body from the packaging
and lay it upside down on a smooth,
flat surface.
This appliance will be hot
Unlatch and unfold the legs to their
during and after use. While
vertical position, then use two (2)
cooking, place unit on
small thumb screws to attach the
heat-resistant and flame-re-
two (2) wheels onto the ends of the
sistant surfaces to avoid
left leg assembly.
damage and injury.
S T E P 0 2
right leg assembly. Use one (1) medium thumb screw to attach the lower
propane tank hanger and the bottom tray to the left leg assembly.
This appliance will be hot
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
!
WA R N I N G
With the help of
!
WA R N I N G
Use one (1) large thumb screw to attach the bottom tray to the
!
WA R N I N G
Model 2086
• Do
ba
• Do
da
re
et
• Do
ba
• Do
da
re
et