Publicidad
Idiomas disponibles
Idiomas disponibles
Owner's Manual |
Care & Maintenance
!
WA R N I N G
Ensure that the fuel nozzle
is housed within the burner
opening.
VIDEO TUTORIAL
How to Clean Your Burner Tube
| Blackstone Griddle
youtube.com/
watch?v=xKQTCrFCzf8
20
blackstoneproducts.com/support
Section 02
CLEANING THE BURNER ASSEMBLY
Unit burners vary, however these instructions apply to all units. Clean
burner assembly and check burner for damage. If any large cracks or
holes are found, replace burner.
S T E P 0 1
Ensure that the gas is turned OFF at control knobs and gas supply.
Remove the cooking top.
S T E P 0 2
Carefully detach and
remove the burner.
S T E P 0 3
Run a narrow bottle
brush through each burner tube
several times. (DO NOT use
wire brushes)
Additional Methods Include:
Run a stiff wire bent into a small
hook through each burner tube
several times.
Use an air hose to force air into
burner tube and out burner ports.
Check that air blows through each
hole. (Wear eye protection)
S T E P 0 4
Brush entire outer
surface of burner to remove grime.
S T E P 0 5
Clean any blocked ports
with stiff wire such as an open
paper clip. Then, carefully replace
burners and reattach.
VERY IMPORTANT: Burner
tubes must be reengaged with the
valve openings.
Model 2086
Publicidad
