Hilti PR 2-HS A12 Manual De Instrucciones Original página 12

Status
2 LEDs light.
1 LED lights.
1 LED blinks.
When the tool is in operation, the battery charge status is indicated in the display on the tool.
When not in operation, battery charge state can be indicated by lightly pressing the release button.
During charging, charge state is indicated by the LEDs on the battery (please refer to the operating
instructions for the charger).
3.1.9 Items supplied
PR 2-HS A12 rotating laser, PRA 20 (02) laser receiver, 2 batteries (AA cells), PRA 83 laser receiver holder,
2 manufacturer's certificates, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Technical data, rotating laser
Rated voltage
Rated current
Maximum relative humidity
Maximum site elevation above datum
Receiving range (diameter) PRA 20 (02)
Accuracy at 10 m (under standard ambient conditions in
accordance with MIL­STD­810G)
Laser class
Speed of rotation
Self-leveling range
Operating temperature
Storage temperature
Weight (including B12/2.6 and respectively B 12­30 bat-
tery)
Drop test height (under standard ambient conditions in
accordance with MIL­STD­810G)
Tripod thread
Protection class in accordance with IEC 60529 (except
battery and battery compartment)
4.2 Technical data, laser receiver
Rated voltage
Rated current
Maximum site elevation above datum
6 English
Meaning
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
PR 2-HS
10.8 V
100 mA
80 %
6,561 ft - 10 in
(2,000 m)
6 ft - 10 in ... 1,968 ft - 10 in
(2 m ... 600 m)
±0.02 in
(±0.5 mm)
Visible, Laser Class 2,
620-690 nm/Po<4.85 mW ≥ 300 ⁄min;
EN 60825-1:2007; IEC 60825-1:2007
5.0 Hz
(300 /min)
±5°
−4 ℉ ... 122 ℉
(−20 ℃ ... 50 ℃)
−13 ℉ ... 140 ℉
(−25 ℃ ... 60 ℃)
5.38 lb
(2.44 kg)
4 ft - 11 in
(1.5 m)
5/8 in
IP66
3 V
150 mA
6,561 ft - 10 in
(2,000 m)
2131237
*2131237*