STG-BEIKIRCH LM3G Manual De Instrucciones página 11

Vent module for 3 groups LM3G
To connect control elements for ventilation
Please keep these operating instructions for future reference and maintenance. Subject to technical modifications. Diagram is not binding.
05/24999653
Area of application
The LM3G module is used in the MZ2 SHE- and ventilation control panel.
The module provides inputs for three ventilation groups.
Each of these ventilation switch inputs is programmable for a selection of
specific functions by simply using the MZ2 configuration software.
Each module receives its own address, between 1 and 8, via a rotary encoder
switch, which enables the MZ2 to operate with up to 8 LM3G modules.
Two indicator lights provide information about operating status and
malfunctions.
Features
• Connection possibilities for ventilation key switches, ventilation switches with
or without "Vent OPEN" indication
• integrated address encoder switch
• DIP-Switch for:
- automatic ventilation function "ON/OFF"
- key switch operation
- "No-self-initiated-stopping" operation
• Snap-mounting onto 35 mm mounting bracket, using bus terminal clamps
• Configuration and parameterization via MZ2 configuration software
Vent module for 3 groups LM3G
11