Brinkmann 810-6230-S Manual Del Propietário página 24

Note: Have someone assist you
while performing Step 6.
Step 6
Align the fi ve bolts on the top of
the cart assembly and the fi ve
holes at bottom of the grill body,
use fi ve wing nuts and washers
to tighten the grill body to the cart
assembly securely.
Step 7
Align the four holes on the hose
assembly over the four pre-
attached bolts on the fi rebox,
insert the bolts through the holes
and slide the hose assembly
downward in place, then tighten
the bolts securely.
Step 8
Attach right and left fi rebox hinges
to the fi rebox using six M6 x
12 mm bolts and six washers.
Step 9
Use two M6 X 12 mm bolts
(Black), two washers and two
hood handle washers to attach the
handle to the hood as shown.
Step 10
Attach the hood hinges to the hood
using four M6 x 12 mm bolts and
four washers as shown.
23
Hose
Assembly
Hood Handle