Zibro S 32 Serie Manual De Instalación página 96

Fig. 19
ATTENTION
• Excessive torque can break nut depending on installation conditions.
• All refrigerant work and refrigerant piping should comply with the local legislation, standards
and codes and should only be done by qualified and skilled engineers.
ELEC TRIC AL WORK
7. An individual branch circuit and single receptacle used only for this air conditioner must be available.
If model S(C)3248 is used, this has to be connected directly to the supply source. See the following
table for suggested fuse specifications:
≤
>
NOTE!
4
96
Fig. 20