Truper MAX-20RS Manual página 6

Parts
Function selection Speed
collar Selector
Torque
Regulator
The cordless hammer drill is useful
both for drilling holes with impact
mode, as well as for screwing and
unscrewing
NOTE
In model MAX-20RS,
battery and charger are sold
Key-less chuck
separately.
with retention
insurance Direction of
rotation and
Switch
Blocking Button
Battery
charger
Battery
connection
Handle
teeth
LED
Light
Battery
Belt clip
Release
Button
20V
Battery Battery Level
Indicator
Charge indicator
Preparation
1
Loading the Battery
1. Plug in the charger in a 127 V~(The green light of the
charging indicator turns on) power outlet.
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should come on.
• When the battery is completely charged, the green light
2
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
Battery failures
• If the red light flashes, it is a sign that the battery has a
delay caused by the heat; wait until the battery
temperature is in the proper range to be able to charge.
• The red light remains on exceeding the recommended
charging time or if the red and green light flash alternately
it is a sign that the battery is defective; you must replace it
or use a Authorized Service Center.
6
ENGLISH