Descargar Imprimir esta página

Broan-NuTone CRDE1 Serie Manual De Instalación página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
Always turn your hood on before you begin cooking to establish an air flow in the kitchen.
Let the blower run for a few minutes to clear the air after you turn off the range. This will help
keep the whole kitchen cleaner and fresher.
The LED modules included with this hood are the latest in LED cooktop illumination technology
specially designed to operate in the elevated temperatures of cooking - offering bright lighting and
lasting up to 25 times as long as a standard bulb and greater reliability than typical replacement LED
bulbs.
Operate the hood as follows:
CRDE1 SERIES
ON/OFF BLOWER PUSH BUTTON
When blower is OFF, push this button to turn ON the blower at the last selected speed. Push this
button again to turn OFF the blower.
NOTE: If there is no speed selected (all blower speed push buttons up), the blower will not turn ON.
In that case, press on the desired speed level push button to activate the blower.
When blower is ON, change the blower speed by pressing the push button corresponding to the
desired speed: one line for LOW, two lines for MEDIUM and three lines for HIGH speed.
ON/OFF LIGHT PUSH BUTTON
When lights are OFF, push once on this button to turn ON the lights. Push this button again to turn
OFF the lights.
CRSF1 SERIES
BLOWER SWITCH
I
Turns blower on to LOW speed.
Turns blower OFF.
II
Turns blower on to HIGH speed.
BLOWER SPEED LEVEL PUSH BUTTONS
LIGHT SWITCH
Turns light OFF.
I
Turns light ON.
5

Publicidad

loading

Este manual también es adecuado para:

Crsf1 serie