Broan-NuTone HARKPM21 Guia De Inicio Rapido

HARKPM21, HARKBN24
FOR USE WITH BBN1243SS, BBN1303SS, BBN2243SS, BBN2303SS,
BBN3306SS, BBN3306SSC, HBN1246SS, HBN1306SS, PM300SS,
PM400SS, PM400SSV
1. Install the powerpack insert as per installation instructions packed with the unit.
2. Remove the grease filter(s) and attach the CHARCOAL FILTER(S) (included) to the backside of
the grease filter(s) using 4 supplied metal clips per filter.
3. Reinstall the filter(s).
4. For units equipped with 6-in. round adapter damper, remove the damper flaps, then connect the
included 6-IN. TO 7-IN. ROUND TRANSITION to the 6-in. round adapter.
5. Cut hole in bottom of SOFFIT to allow clearance for the 90° ANGLE BOOT (included).
6. Locate top of 4¼" x 10¼" OPENING on soffit - centered on POWERPACK INSERT CENTERLINE.
7. Layout 4¼" x 10¼" pattern and cut opening in soffit.
8. Connect 90° ANGLE BOOT to 7-IN. ROUND DUCT (included).
9a.PM300SS, BBN1243SS
7-in. round duct end to the exhaust of the unit.
9b. a : Insert boot end into soffit and connect the 7-in. round duct end to the transition
ll other uNitS
previously installed in step 4.
10. Install GRILLE (included - not shown) into soffit opening.
11. Use metal foil tape to make all connections secure and air tight.
PM300SS,
BBN1243SS, BBN1303SS
SOFFIT
CABINET
CHARCOAL FILTER
(included) (S99010464)
HH0316
POWERPACK INSERT
CENTER LINE
INSTALLATION INSTRUCTIONS
aNd
BBN1303SS
aNd
OPTIONAL METAL LINER
C L
HARKBN30 NON-DUCT KITS
aNd
PM600SSV POWERPACK INSERTS
: Insert boot end into soffit and connect the
uNitS oNly
PM400SS, PM400SSV, PM600SSV,
4¼" x 10¼"
SOFFIT OPENING
90° ANGLE BOOT
(included)
7-IN. ROUND DUCT
(included)
6-IN. TO 7-IN.
ROUND TRANSITION
(included)
(LB30SS or LB36SS)
(purchase separately)
BBN2243SS, BBN2303SS,
BBN3306SS, BBN3306SSC,
HBN1246SS, HBN1306SS
CHARCOAL FILTERS
(included) (S99010464-124)
C L (S99010464-130)
POWERPACK INSERT
CENTER LINE
SOFFIT
CABINET