Publicidad
Idiomas disponibles
Idiomas disponibles
Registering Magic Remote
Control
The Magic Remote Control operates by pairing
with your TV.
How to register the Magic Remote Control
To register automatically, turn the
TV on and press the
When registration is completed, the
completion message appears on the
screen.
If registration fails, turn the TV off and
(Wheel)
back on, then press the
to complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
SMART buttons together for 5
seconds to reset, then register it
BACK
by following "How to register the
Magic remote control" above.
2 To re-register the Magic remote
SMART
control, press and hold the
button for 5 seconds toward the TV.
How to use Magic Remote
Control
1 You can move the pointer by moving
the remote up and down or left and
right.
»
If the pointer does not work
y
properly, wait 10 seconds
and then try again.
2 If the pointer disappears, move
the remote control slightly to left
or right. It will then automatically
appear on the screen.
»
If the pointer has not been
y
used for a certain period of
time, it will disappear.
MAGIC REMOTE CONTROL FUNCTIONS
Wheel (OK).
1
Wheel (OK)
2
Precautions to Take when
BACK and
Using the Magic Remote
Control
BACK
Use the Magic remote control within the maximum
y
y
communication distance (10 m, 32.8ft). Using the
remote control beyond this distance, or with an
object obstructing it, may cause a communication
failure.
A communication failure may occur due to nearby
y
y
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic remote control.
The Magic remote control may be damaged or may
y
y
malfunction if it is dropped or receives a heavy
impact.
Take care not to bump into nearby furniture or other
y
y
people when using the Magic remote control.
Manufacturer and installer cannot provide service
y
y
related to human safety as the applicable wireless
device has possibility of electric wave interference.
It is recommended that an Access Point (AP) be
y
y
located more than 1 m (3.28 ft) away from the TV.
If the AP is installed closer than 1 m (3.28 ft), the
Magic remote control may not perform as expected
due to frequency interference.
1
2
If you press
Wheel (OK) on the Magic
remote control, the screen above opens.
It shows information about the current
program and screen.
You can select My Apps Menu.
29
Publicidad
