Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUST THE CUTTING PATH
The cutting path can be adjusted from 14"-
16" (35.6-40.6 cm). Philips Head Screwdriver
(Not Supplied) is required.
Loosen the screw and turn the cutter 180°
then tighten the screw.
OPERATION
Cut-Off Blade
WARNING
•
Do not squeeze the trigger while the string
trimmer/edger is inverted.
•
Do not carry the string trimmer/edger
with your finger on the trigger. Avoid
unintentional starting.
LENGTHENING THE LINE
While the string trimmer is operating, the
cutting line gets worn down and becomes
shorter. This trimmer is equipped with bump
feed line advancement, which advances
additional line once the head is bumped on
the ground while rotating. The cutting blade
will cut the line to keep an accurate cutting
swath.
11
:
To avoid injury:
Bump knob
Publicidad
