Publicidad
STEP 16
1. With the help of another person, carefully turn the unit over.
2. Start with securing back panel with screws, but do not tighten.
3. Secure back panel by nailing straight into back edges as shown.
4. Tighten screws.
Attach the back panel so
that the bottom edge is
even with the bottom (E).
ameriwoodhome.com
9
(x6)
(x22)
#A12120
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF
THIS UNIT AND MUST BE INSTALLED PROPERLY.
23
11
Assure that the unit is square.
Distance from corner to corner must
be equal as shown.
AA
Larger holes in back panel
along this edge.
11
9
Publicidad
