Publicidad
STEP 23
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
· Install tipover restraint provided.
· Place heaviest items in the lowest
drawers.
· Unless specifically designed to
accommodate, do not set TV's or
other heavy objects on the top
of this product.
· Never allow children to climb or
hang on drawers, doors, or shelves.
· Never open more than one drawer
at a time.
Use of tipover restraints may only
reduce, but not eliminate the risk
of tipover
For Masonry, Concrete, or other
wall
materials:
Consult your local hardware store for
appropriate anchors to securely
attach the
safety bracket.
Option 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned at this
location.
To make driving the screw easier, you can drill a
Drive the screw through the safety bracket into the wall stud.
Tighten the screw that was not fully tightened in step 8.
Option 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your unit aside.
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall anchor into the hole until it is flush. Fasten the wall
bracket to the wall anchor with the screw.
Tighten the screw that was not fully tightened in step 8.
ameriwoodhome.com
16c
16d
1
" diameter pilot hole (3mm) through the safety bracket into the stud.
8
30
hole
16d
option 2
option 1
16c
wallboard
stud
Publicidad
