Kicker KM65 Manual Del Propietário página 2

Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
The KICKER KM coaxial speakers are specifi cally designed for mounting in free-air applications. The
speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound
coming off the front of the driver from the sound radiating from the back of the driver. This isolation is
usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated
rear chamber.
SPECIFICATIONS
Model:
Woofer [in, mm]
Tweeter [in,mm]
Rated Impedance [Ω]
Peak Power Handling [ Watts]
Continuous Power Handling [Watts RMS]
Sensitivity [1W, 1m]
Frequency Response [Hz]
Mounting Hole Diameter [in, mm]
Mounting Depth [in, mm]
Grilles
Tweeter Magnet Material
Tweeter Dome Material
Tweeter Design
Woofer Cone Material
Woofer Surround Material
LOCATION
The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If
necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage.
After determining the best mounting locations, carefully check the areas where the mounting hardware will
be placed.
Pro Tip: You are one KXM Amplifi er and a few cables away from a complete, high-quality system with
rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER KXM amplifi er
upgrades.
2
2014 KM Coax Rev d.indd 2 2014 KM Coax Rev d.indd 2
KM Coaxial Speakers
Owner's Manual
KM4 KM65
4, 100 6-1/2, 160
1/2, 13 3/4, 20
2, 4 2, 4
150 195
50 65
89 90
60-20k 35-21k
3-13/16, 97 5-1/8, 130
1-7/8, 48 2-7/8, 72
Yes Yes
Neodymium Neodymium
PEI (polyether imide) Titanium
Balanced Dome Dome
Polypropylene Polypropylene
Santoprene Santoprene
KM8
8, 200
1, 25
4
300
150
92
30-21k
6-11/16, 170
3-1/4, 82
Yes
Neodymium
Titanium
Dome
Polypropylene
Santoprene
11/22/2013 11:44:33 AM 11/22/2013 11:44:33 AM