Simfer IQ M7051N03N 1 Serie Manual Del Usuario página 36

EN
OVEN LAMP
Replacement of the Oven Lamp
WARNING: To avoid electric shock, ensure that the device circuit is open before
changing the lamp.
(Open circuit means that the power is cut-off.)
Cut off the power supply of your appliance first, and ensure that the it is cooled down.
Remove the glass protector by rotating as shown in the figure.
Using plastic gloves may help you if you have difficulty in rotating it.
Then, remove the lamp by rotating it, and install the new lamp with the same
specifications. Replace the glass protector, plug the appliance and complete the
replacement procedure. You can now use your oven.
Type G9 Bulb
SUGGESTIONS FOR ENERGY SAVING
a) While the food is cooking, the oven door should not be opened frequently.
b) Always use the original accessories included in the manual for better results.
c) While cooking your food, preheat the oven if the recipe or the table in the user
manual says to preheat.
d) Cook multiple dishes one after the other. The oven will not lose its heat. Turn off
the oven a few minutes before the end of cooking. In this case, do not open the oven
door.
Type E14 Bulb
22 -2
5-25
22 -2
36
5-25