Triton Superjaws XXL SJA300 Instrucciones De Uso página 10

4. Fit either the roller support (as shown in Fig 22) or standard
support (as shown in Fig 23) to the correct side of the extension
bar
5. Rotate the securing clamp lever of the support so there is
sufficient play to lock the clamp lever and secure the support in
place on the extension bar
6. Adjust the height of the support by rotating the securing clamp
lever and adjusting the height, then tighten at the required
height position
7. Re-fit plastic end pieces to the extension bar if required, and re-
fit the Phillips screw in each end. The plastic end pieces prevent
supports from coming off the extension bar, and also cover the
metal ends
Note: The extension bars can be used without use of the plastic
end caps, which means it will not be necessary to carry a Phillips
screwdriver with Superjaws.
Caution: The extension bars and supports are not rated to the
same 250kg capacity as SuperJaw's frame. Do not overload
the extension bars. For heavy workpieces ensure the weight is
centralised on the main frame of SuperJaw. If necessary, move
the support closer to the frame on the extension bar. Use multiple
extension bars and supports when extra strength is required.
Notes:
• It is advisable, when using larger workpieces, or where the
supports need to be at a measured distance , to always use bar
clamps to prevent the extension bars from moving
• Fit the roller support the correct way to allow the bar stop to
come up correctly behind the roller during use, as shown in Fig
22
• Make sure SuperJaws does not become unbalanced with the
accessories fitted. If necessary, secure the feet of SuperJaws to
a surface using the holes in the front feet, as shown in Fig 19
• If the central pin (as indicated in fig 25) in a securing clamp
lever comes loose, unlock the securing clamp and unscrew the
clamp so the pin can be re-fitted correctly. Do not try to use the
clamp if the pin is not correctly fitted in the lever
• The clamping mechanism position can be moved to an
alternative side of the extension bar, which may make it easier
to clamp and unclamp, depending on use and workpiece
• Always remove accessories before folding and transporting
SuperJaws
Check with your Triton stockist for other accessories for SuperJaws
GB
Optional Accessories
10