Kohler K-T14419 Guia De Instalacion página 5

Install the Handles (cont.)
If adjustment is needed to achieve the desired handle alignment,
remove the handle, screw and spline adapter or stem extension.
Turn the spline adapter 1/4 turn. Check the handle position.
Repeat the procedure until the proper handle position is achieved.
Secure with the screw.
Thread the handle assembly onto the escutcheon. To maintain the
proper handle alignment, hold the handle in place with one hand
and turn the base of the handle with the other hand.
Repeat the procedures with the second handle.
Kohler Co. 5 1023411-2-B