Descargar Imprimir esta página

Bestron AAC6000 Manual Del Usuario página 40

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Any person who is involved with working on or breaking into a
refrigerant circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specification.
Servicing shall only be performed as recommended by the
equipment manufacturer.
If you pass this device on to someone else, you must include these
operating instructions with the device.
Do not switch the device on and off in quick succession. After
switching off, wait a short time before switching the device on
again.
WHAT YOU SHOULD KNOW ABOUT THIS APPLIANCE
Notes:
The air conditioning is only suitable for indoor use and is not
suitable for other applications.
Follow local grid interconnection rules while installing the air
conditioning and ensure that it is properly grounded. If you have
any question on electrical installation, follow the instructions of the
manufacturer, and if necessary, ask a professional electrician to
install it.
Place the machine in a flat and dry place and
keep a distance of above 30cm between the
machine and the surrounding objects or walls.
After the air conditioning is installed, ensure
that the power plug is intact and firmly plugged
into the power outlet, and place the power cord
orderly to prevent someone from being tripped
or pulling out the plug.
Do not put any object into the air inlet and
outlet of the air conditioning. Keep the air inlet
and outlet free from obstructions.
Do not use force to adjust the upper and lower
air ducts to avoid damage.
While adjusting the upper and lower wind-
guide strips of the air outlet, pluck it with hands
gently to avoid damaging wind-guide strips.
When moving the machine, make sure that it is
in an upright position.
The machine should stay away from gasoline, flammable gas,
stoves and other heat sources.
Don't disassemble, overhaul and modify the machine arbitrarily,
40
Caution, risk of fire!
R290
EN

Publicidad

loading