Technical Information; Installation Considerations - Hansgrohe AXOR 16180181 Instrucciones De Montaje

Tabla de contenido

Publicidad

2
1⅝"
2¼"
2⅜"
6⅛"
4⅛"
5⅜"
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• The rough must be installed so that the outside
surface of the finished wall falls between the "min"
and "max" lines on the plaster shields.
• To insure correct operation of the faucet, the hot
supply must be installed on the left, and the cold
supply must be installed on the right.
• Only one outlet on the mixer iBox is used. The
second outlet must be sealed with a ¾" plug.
• The rough and the transformer must all remain ac-
cessible for future servicing
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*

Publicidad

Tabla de contenido
loading

Tabla de contenido