Publicidad
SIGNODE BXT2-10
2
Fig. 9
1
Fig. 10
1
➟
Fig. 11
1
2
AUTO
➟
MAN.
SOFT
A)
1
2
3
4
400
500
600
700
88
110
132
154
B)
1
2
3
4
150
225
300
375
33
50
66
83
Fig. 12
18
1
2
2
3
=
+ / -
AUTO
AUTO
=
MAN.
MAN.
SOFT
SOFT
3
5
6
7
8
800
900 1000 1100 1200 N
139
176
220
242 265 lbs.
5
6
7
8
450
525
600
675
99
115
132
148 165 lbs.
– Check appearance of seal (see fig. 9) regularly. If the
straps are poorly welded, check the welding time
setting (refer to chapter 5.7).
1 Good seal (the complete surface is cleanly welded
without excess material being forced out sideways).
2 Poorly welded seal (not welded over the complete
surface), welding time too short.
3 Poorly welded seal (excess material is forced out
sideways), welding time too long.
3
5.4 CHECKING BATTERY CHARGE
– Read off battery charge on LED indicator (Fig. 10):
1 = Green indicator: maximum battery charge
3
2 = Green indicator: good battery charge
3 = Red indicator: empty battery
(Battery must be charged)
– Press the „Function" button (11/1) briefly.
– Press the „Strap tension" button (11/2) until the
flashing digital display (11/3) shows the required strap
tension. Wait two seconds until the new setting is
saved.
1 = min. strap tension approx. 400/150 N* (88/165 lbs.)
9 = max. strap tension approx. 1200/750 N*
(265/165 lbs)
* refer to Chapter 5.6
The maximum tension available depends on the
strap dimensions and quality. If any strap
ruptures or loops occur, the tensioning force should be
reduced accordingly.
AUTO
The following two strap tension ranges can
MAN.
be set on the tool:
A = 400–1200 N (88–265 lbs.)
SOFT
B = 150–750 N (33–165 lbs.) Soft tension*
* Soft tension: tension wheel starts slowly. Prevents
9
excessive dirt on PP straps.
Setting soft tension:
– Press the „Function" button (12/1) briefly.
– Press the „Mode of operation" button (12/2) several
9
times until the green „SOFT" LED indicator (12/3)
750 N
lights up together with the desired mode of operation
(refer to chapter 5.8).
5.3 CHECKING THE SEAL
5.5 SETTING STRAP TENSION
5.6 SETTING SOFT TENSION
standard
01.14
Publicidad
