Publicidad
Idiomas disponibles
Idiomas disponibles
O P E R A T O R ' S
M A N U A L
Basic Operation
1.
Mower
a.
Make sure mower is on grass and that there are no obstacles or debris in
front of the mower.
b.
Adjust the cutting height to the desired level prior to connecting the
battery and powering ON the mower, by utilizing the height adjuster
handle on the back for the rear wheels and the levers at each of the front
wheels.
Warning
Adjusting the height-of-cut could bring your hands into contact with
a moving blade and result in serious injury. Press the eStop button
and wait for all moving parts to stop rotating. Shut off the mower
using the main switch and unplug the battery.
c.
Next, place the battery in the mower battery bay and plug it into the
mower, toggle the main switch to the "ON" position.
d.
Wait for about 15 seconds while the mower fully powers on. The first
(left) LED light on the main mower housing will light up green when the
mower is ready to use.
i.
e.
When ready to use, disengage the eStop button by slightly rotating it
clockwise.
Revision 20221025
Note: The blade will not start until the mower has fully power on and
all internal systems have initialized. This is only needed when a
battery is re-connected.
21" Commercial Push Lawn Mower
Page 9
Publicidad
