Publicidad
Idiomas disponibles
Idiomas disponibles
O P E R A T O R ' S
M A N U A L
h.
To stop the blade rotation, fully let go of the control lever. You can
disengage the self-propel system while keeping the blade on by
releasing the control lever just enough to slow the self-propel system to
a stop, but not so far as to fully disengage the blade. You can also
disengage the blade and self-propel at any time by pressing the eStop
button.
i.
i.
If you must use the bag for grass collection, please first turn off the
mower and wait for all moving parts to stop. Remove the grass plug, lift
the grass door, and hang the bag from the tabs on the mower.
Warning
Removing or installing the glass plug insert could bring your hands
into contact with a moving blade and result in serious injury. Shut off
the motor, remove the battery, and wait for all moving parts to stop
before installing or removing any component related to the grass
bag. Do not put your fingers under the housing when installing or
removing the grass plug or bag.
j.
If mulching is desired, make sure the grass plug is inserted in the grass
chute after the grass bag is removed.
k.
If you see the mower Status Light (first light on the left) turn red at any
time, please contact Oso Customer Support or your Sales
Representative.
Revision 20221025
Note: Notice that when slowing down the self-propel speed, if the
control level is released too far, the blade will also stop as well. If this
is not the user's intention, please practice stopping the self-propel
system while leaving the blade on by familiarizing yourself with the
different positions of the control lever.
21" Commercial Push Lawn Mower
Page 11
Publicidad
