Chapter 3 - Assembly
Assembly
1.
Remove the product from its packaging materials. No assembly is required as the unit is
preassembled.
2.
The baking rack handle folds into the baking rack face panel when not in use for
convenient storage. To unfold the handle for use, pull the right end of the handle out and
away from the pizza oven until it is perpendicular with the oven and locked in place.
3.
Before the first use, thoroughly wash the baking rack with a warm, soapy cloth. Gently
rinse the parts and dry them thoroughly. Using a damp cloth, wipe the inner surface of
the crumb tray and dry it thoroughly.
NOTE: DO NOT immerse the baking rack face panel or the pizza oven in water or any other
liquids.
4.
Reinsert the crumb tray and baking rack into the pizza oven. Ensure the hinged crumb
tray is locked into place with the pizza oven housing. Place the oven on a flat, dry
surface away from the countertop edge and plug the unit into a 120V AC electrical outlet.
10
cshelp@cnaii.com
MODEL: KLPZO13ST PRODUCT CODE: 46592-15 11/2014
Stainless Steel Pizza Oven
AFTER SALES SUPPORT
888 775 0202