Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
Before mounting this product, read the
Mounting Diagram
Eye Bolt Installation
1.
Remove cotter-pin from set-pin by pressing the safety button in the middle of the handle.
2.
Remove set-pin from eye bolt.
3.
Align the eye bolt over one of the pre-cut holes on the rig bar.
4.
Insert the set-pin to secure the eye bolt to the rig bar
5.
Re-insert the cotter-pin bac into the set-pin
Mounting Procedure
1.
Insert alignment hanger into the alignment hole and push panel forward.
2.
Push both male Speego into female Speego connections and turn clockwise to tighten panel to the rig bar.
3.
Reverse the steps above to remove panel from rig bar. Push tab on female Speego connection to release male
Speego.
The alignment hanger on the PVP X6IP is designed to temporarily hold the weight of the panel to
allow the user to properly align and tighten the panel into place
Technical Specifications
Dimensions and Weight
Length
23.15 in (588 mm)
Load Capacity
600 lb (272 kg)
Note: Dimensions in inches are rounded.
Ordering
Product Name
RB-X50CM
RB-X50CM QRG Rev. 1
QUICK REFERENCE GUIDE
Safety
Notes, as well as those for the attached products.
Width
5.12 in (130 mm)
Item Name
RBX50CM
Height
6.46 in (164 mm)
Recommended Shackle
5/8"
Item Code
23090926
EN
Weight
11.4 lb (5.2 kg)
UPC Number
781462212742
2
Publicidad
