Lenco Classic Phono TT-120 Manual De Usuario página 7

Ocultar thumbs Ver también para Classic Phono TT-120:

Idiomas disponibles

9. Charge indicator

10. Power switch/ Volume control

11. Headphone jack

12. Stylus

13. Lock catch

14. Carrying handle

15. Speaker

16. Aux in jack

17. Line out channel R/L

18. DC in jack

19. Pair

20. Previous track

21. Next track

22. Play/pause

23. Mode

24. Mode indicator, will blink when the battery is low

Mode

1. Short press "Mode" to select the playing mode.

2. Blue LED will be flashed when Bluetooth is pairing.

3. Blue LED will be illuminated when Bluetooth is connected

4. Red LED will be illuminated when it is turntable mode.

5. Green LED will be illuminated when it is Aux in mode.

Using the turntable

1. Place the turntable case on a flat level surface.

2. Insert the adaptor cord into the Dc jack at the rear of the case and plug the

adaptor into the mains supply socket.

3. On first use, ensure that the cable tie is removed from the player arm.

4. Remove the stylus cover and keep in a safe place for future use

5. Move the speed selector to the speed (33, 45 or 78rpm) corresponding to the

record to the played