Lenco SCD-6800GY Manual Del Usuario página 11

More features
A. Alarm clock setting
This function allows the system to turn on automatically and wake you up CD, FM/DAB, Tape or USB mode. Set the system at
standby mode, then press and hold the "Timer" key to enter the Timer setting mode, LCD will show Timer On time, Moreover, the
timer clock will flash the hour digit, means the unit already enter timer setting mode.
1) On time setting
2) Off time setting
3) Mode
Active/de‐active timer function (In standby mode only)
1. To active timer function, press the "Timer" button once the timer indicator "
2. To cancel timer function, press again "Timer" button again the timer indicator "
Remark:‐

If there is no music source being detected (CD or USB) when the preset time is reached, system will default to "FM" function
for wake up mode automatically. The system will preset at the latest radio frequency being listened before switching off

For FM/DAB wake up, the system will preset at the latest radio frequency being listened before switching off.

For Tape wake up, pls ensure cassette tape must inserted to cassette compartment and cassette play key must be pressed.
Otherwise, there was no music will playing once reach the timer on time.

There are about 4 seconds for alarm setting mode, this system will return to normal mode automatically if no keys being
pressed in this time frame.

During the alarm on mode, press the "On/off" button (17) will switch off the system.

Due to display size limitation, timer icon "
Remark (for Europe market only): Due to ErP stage two requirement and protect the
environment. The unit will switch to standby mode automatically once no any music playing
over 15 minutes.
Power supply adaptor (For EU only)
Use only the power supply listed in the user instructions
Information
Manufacturers name or trade mark, commercial
registration and address
Model Identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output Power
Average active efficiency
Efficiency at low load (10%)
No load Power consumption
Version: 1.0
: Press the skip up or down
store the timer starting hour, minute digit will flash, press skip up
set the minute. Then press Timer button (13) to store the timer on time
: After above step, the LCD will show "Timer Off" and hour digit was flashing. Press skip up
or down (19/11) to set the hour. Then press Timer button (13) to store the timer off hour,
minute digit will flash, press skip up
Timer button (13) to store the timer off time
: Then press skip up or down
button (13) to store the timer on mode. Press skip up
on volume level and press Timer button (13) to complete the timer setting. Unit will return to
standby mode display will show timer icon "
" will not appear on LCD during operate FM/DAB mode
(19/11) to set the hour. Then press Timer button (13) to
or down (19/11) to set the minute. Then press
(19/11) to select timer on mode. Then press Timer
or down
".
" is appear on LCD display (2).
" disappear.
Value and and precision
Shenzhen Guijin
Technology Co., Ltd
AK18WG‐1200150V
100‐240 Volts
50‐60 Hz
DC12V
1.5A
18W
75%
50%
0.05W
11
or down (19/11) to
(15/21) to select timer