Sharp LC-43LE551U Manual De Operación página 14

Watching TV
4
Press c/d to enable/disable the Daylight Saving Time, and then press ENTER to continue to the next
step.
Daylight Saving
Daylight Saving selection
Change
ENTER Select
Antenna Setting
Make sure what kind of connection is made with your TV when selecting "Cable" or "Antenna".
5
Press c/d to select "Cable" or "Antenna", and then press ENTER to continue to the next step.
Auto Scan
Select the Signal Type of your TV input and start auto scan.
Move
ENTER Select
Channel Scanning
Channel auto search makes the TV look for all channels viewable in the set area.
6 When "Cable" or "Antenna" is selected in Tuner setting, press //ENTER to highlight "Start Scan", and
then press ENTER to start auto search.
Auto Scan
Select the Signal Type of your TV input and start auto scan.
Move
ENTER Select
Daylight Saving: On
RETURN Previous Step EXIT Exit
Signal Type: Cable
Start Scan
Change
RETURN Previous Step EXIT Exit
Signal Type: Cable
Start Scan
RETURN Previous Step EXIT Exit
During channel searching:
• Wait until the channel scan to complete.
• If you press ENTER, the TV will exit Easy Setup.
• If you skip this step, the channel search can be performed in the Setup Menu. (See page 22.)
Scanning
Channel scan in process, if you want to stop scanning, please
press "Stop Scan".
ENTER Select
Completed
7
After setting complete, the screen will show "Channel scan completed" message on the screen, and then
press ENTER to continue to the next step.
Scan Finish
Channel scan completed.
ENTER Select
8
Press ENTER to fi nish the Easy Setup.The TV will then switch to the fi rst channel found.
Finish
Initial Setup has finished, please press "OK" to exit Easy Setup.
ENTER Select
NOTE
• The channel scanning may take a while to complete.
• If no channel is found, confi rm the type of connection made with your TV and try "Easy Setup" again. (See page
22 .)
Scan Status:
70%
Analog Channel : 89
Digital Channel : 0
Stop Scan
Analog Channel : 100
Digital Channel : 0
OK
RETURN Previous Step EXIT Exit
OK
RETURN Previous Step EXIT Exit
13