Publicidad
Idiomas disponibles
Idiomas disponibles
ow to use washer
H
The option buttons also activate special
functions, including CHILD LOCK, DRUM LIGHT,
TUB CLEAN, SPINSENSE™, and LANGUAGE.
Press and hold the option button marked with the
special function for 3 seconds to activate.
CHILD LOCK
Use this option to prevent
unwanted use of the washer or
to keep cycle settings from
being changed while the
washer is operating. Press and hold the
PREWASH button for 3 seconds to activate or
deactivate CHILD LOCK.
CHILD LOCK will be shown in the display, and all
controls are disabled except the ON/OFF button.
The washer can be locked during a cycle.
DRUM LIGHT
The drum is equipped with a
blue LED light that illuminates
when the washer is turned on.
This light automatically turns
off when the door is closed and the cycle starts.
To turn on the light during a cycle, press and hold
the RINSE+SPIN button for 3 seconds. The drum
light will illuminate and then turn off automatically
after 4 minutes.
TUB CLEAN
A buildup of detergent residue
can occur in the wash tub over
time and can lead to a mildewy
or musty smell. The TUB
CLEAN cycle is specially designed to remove this
buildup. Press and hold the EXTRA RINSE
button for 3 seconds to activate this cycle. The
display will show a message to add liquid bleach
to the dispenser. After the cycle has ended, open
the door and allow the drum interior to dry
completely.
NOTE: Do NOT use this cycle with clothes, and
do NOT add detergent or fabric softener.
SPECIAL FUNCTIONS
SPINSENSE™
SPINSENSE can be used to
help reduce or eliminate
vibrations, especially on
wood floor installations.
To activate SPINSENSE™:
While the washing machine is running in any
cycle, press and hold the STAIN CYCLE button
for 3 seconds.
The STAIN CYCLE button light will remain lit
while the washer is running to show that
SPINSENSE is active. The SPINSENSE
function will remain active for every cycle, even
after a power failure.
To cancel SPINSENSE™:
Press and hold the STAIN CYCLE button for 3
seconds to turn off the SPINSENSE function.
LANGUAGE
This option allows you to
change the language shown
in the display. Once set, the
selected language will stay
set even after the power is
turned off.
The display language options are English,
French, and Spanish; English is the default
language.
To change the language:
❶ Press the ON/OFF button to turn on the
washer.
❷ Press and hold the WATER PLUS button
for 3 seconds, until the following screen
appears in the display.
❸ Press the WATER PLUS button repeatedly
to cycle through "FRANÇAIS" (French),
"ESPAÑOL" (Spanish), and then back to
English.
21
Publicidad
