Sharp UA-PN1E-W Manual De Instrucciones página 9

CARE AND MAINTENANCE
MAIN BODY
AIR INLET / PRE-FILTER
Remove the dust gently with a cleaning tool such as a vacuum
cleaner.
1
Bottom Cover
About Pre-Filter
NOTE
• Do not apply excessive pressure when scrubbing the Pre-Filter.
• How to clean hard to remove dirt.
1. Add a small amount of kitchen detergent to water and soak
for about 10 minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the filter in a well ventilated area.
Wipe with a dry, soft cloth.
2
Pre-Filter
EN-7
Always be sure to remove
the AC Adapter from the
wall outlet.
When it gets dirty
Once a month