memorex MVR4042 Manual De Instrucciones página 14

AUDIO/VIDEO CONNECTIONS
If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher quality
picture and sound. If you have a stereo, you can connect a stereo amplifier to enjoy powerful sound.
AUDIO/VIDEO CONNECTION
1. Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.
2. Connect the AUDIO (L/R) OUT jacks on the VCR to the AUDIO (L/R) IN jacks on the TV.
3. Set the VIDEO/TV selector of your TV to "VIDEO".
STEREO AMPLIFIER CONNECTIONS
When you connect your VCR to a Stereo Component System, you can view the picture from the VCR while
enjoying powerful sound from your audio system.
VCR
To UHF/VHF OUT
Connect the AUDIO (L/R) OUT jacks on the VCR to the AUX (L/R) IN jacks on the stereo amplifier.
14
4F90701A/E P14-19
From ANTENNA/CATV system
VCR
To UHF/VHF IN
IN
OUT
To UHF/VHF OUT
From ANTENNA/CATV system
To UHF/VHF IN
VIDEO Cable (not supplied)
To VIDEO OUT
IN
OUT
14
To VIDEO OUT
To AUDIO (L) OUT
To AUDIO (R) OUT
To VIDEO IN
To AUDIO (L) IN
AUDIO/VIDEO Cable (not supplied)
To ANT IN
To VIDEO IN
To AUDIO (L) OUT
To AUX (L) IN
To AUDIO (R) OUT
AUDIO Cable (not supplied)
20/03/2003, 10:32
TV
To ANT IN
To AUDIO (R) IN
TV
To AUX (R) IN