Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE CHANNELS
This VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the VCR's memory. In addition to
normal VHF and UHF channels, this VCR can receive
up to 113 Cable TV channels. To use this VCR with an
antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in
the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
2
Press the TRACKING SET + or –
button to select the CH SETUP
option, then press the ENTER
button.
3
Press the TRACKING SET + or
– button to select the TV/CATV
mode.
4
Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
TV
- VHF/UHF channels
CATV - CABLE TV channels
5
Press the MENU button twice to return to normal TV
viewing.
AUTOMATIC MEMORY TUNING
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
1
Press the MENU button.
Press the TRACKING SET + or –
button to select the CH SETUP
option, then press the ENTER
button.
2
Press the TRACKING SET + or
– button to select the AUTO CH
MEMORY mode, then press the
ENTER button.
3
The auto tuning will start.
The channel display will count
up and when finished, the
screen returns to normal.
16
4F90701A/E P14-19
TO ADD/DELETE CHANNELS
1
Press the MENU button.
Press the TRACKING SET +
or – button to select the CH
SETUP option, then press the
ENTER button.
2
Press the TRACKING SET + or
– button to select the ADD/DE-
LETE mode, then press the
ENTER button.
MENU
3
Select the desired channels to
TIMER REC SET
AUTO REPEAT
ON OFF
SAP
ON OFF
be added or deleted using the
CH SETUP
SYSTEM SETUP
TRACKING SET + or – button.
4
+/-/ENTER/MENU
Press the ENTER button if you
á
ñ
wish to DELETE the channel
CH SETUP
from memory.
TV
CATV
Press the ENTER button if
AUTO CH MEMORY
ADD/DELETE
you wish to ADD the
unmemorized channel.
+/-/ENTER/MENU
Repeat Steps 3 and 4 for each channel to be added
á
ñ
or deleted.
5
Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.
NOISE ELIMINATION
When you don't want to receive a weak signal
broadcast, the Blue back screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON" position.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
MENU
TIMER REC SET
• Press the TV/VCR selector button to select the VCR
AUTO REPEAT
ON OFF
SAP
ON OFF
mode.
CH SETUP
SYSTEM SETUP
When a TV is connected with an audio/video cable,
+/-/ENTER/MENU
turn the TV and this VCR on and select the video input
á
ñ
mode on the TV.
CH SETUP
1
Press the MENU button, then
TV
CATV
AUTO CH MEMORY
press the TRACKING SET + or
ADD/DELETE
– button to select the SYSTEM
SETUP option. Then press
+/-/ENTER/MENU
á
ñ
ENTER.
2
Press the TRACKING SET + or
– button to select the NO
+0
NOISE BACKGROUND option.
3
Press the ENTER button to
select the ON position.
4
Press the MENU button twice
to return to normal TV viewing.
16
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
SAP
ON OFF
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á
ñ
CH SETUP
TV
CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á
ñ
ADD
+/-/0-9/ENTER/MENU
á
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á
ñ
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/-/ENTER/MENU
á
ñ
20/03/2003, 10:32
CH 003
ñ
Publicidad
