Glacier bay HD833CX-0027D Guía De Instalación Y Cuidado página 10

Installation (continued)
7
Installing the handle
NOTE: Before proceeding, ensure the valves are closed.
□
Position the anges (E) on the valve body (D).
□
Thread the screws (F) onto the stems (1). Place the handles (G) onto the valve body (D) and tighten the
set screw (H) with the Hex wrench (Hex: 2.5 mm, L) provided.
□
Attach the indexes (I).
Care and Cleaning
□
To clean, wipe down with a damp cloth and dry with a towel.
□
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
F
G
H
L
I
10
D
1
E