Domo DO938K Manual De Instrucciones página 43

oor
s unplugged and empty.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
s unplugged and empty.
2 people handle the unit during assembly.
oor
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
1. Remove the screws on the back of the top cover.
slip during the door reversing process.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
2 people handle the unit during assembly.
ews at rear side of top cover.
oor
s unplugged and empty.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
it flat as this may damage the coolant system.
s unplugged and empty.
2 people handle the unit during assembly.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
ews at rear side of top cover. 2 people handle the unit during assembly.
er and thermostat knob, then place it aside.
2. Remove the top cover.
ews at rear side of top cover.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
3. Remove the three screws and then remove the top hinge that holds the door in place. Lift the door
and place it on a padded surface to prevent it from being scratched.
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
4. Remove the bottom screw, hinge bracket and adjustable feet from the bottom of the appliance.
hinge. Then remove the adjustable feet from both
www.domo-elektro.be
7
7
7
7
unscrew
unscrew
unscrew
unscrew
43
DO938K