Philips GC9315/30 Manual Del Usuario página 7

1 Open the water tank filling door (Fig. 3).
2 Fill the water tank up to the MAX indication (Fig. 4).
3 Close the water tank filling door ('click').
Water tank empty light (specific types only)
When the water tank is almost empty, the 'iron ready' light starts to flash (Fig. 5).
Fill the water tank and press the steam trigger to let the appliance heat up again. When the 'iron
ready' light lights up continuously, you can continue steam ironing.
Using the appliance
OptimalTemp technology
Warning: Do not iron non-ironable fabrics.
The OptimalTemp technology enables you to iron all types of ironable fabrics, in any order, without
adjusting the iron temperature and without sorting your garments.
It is safe to just rest the hot soleplate directly on the ironing board (Fig. 5) without putting back to the
iron platform. This will help reduce the stress on your wrist.
- Fabrics with these symbols (Fig. 6) are ironable, for example linen, cotton, polyester, silk, wool,
viscose and rayon.
- Fabrics with this symbol (Fig. 7) are not ironable. These fabrics include synthetic fabrics such as
Spandex or elastane, Spandex-mixed fabrics and polyolefins (e.g. polypropylene). Prints on
garments are not ironable either.
Ironing
1 Place the steam generator on a stable and even surface.
Note: In order to ensure safe ironing we recommend to always place the base on a stable ironing
board.
2 Make sure that there is enough water in the water tank (see 'Filling the water tank').
3 Put the mains plug in an earthed wall socket and press the on/off button to switch on the steam
generator.Wait until the 'iron ready' light lights up continuously (Fig. 8). This takes approx. 2
minutes.
4 Remove the water supply hose from the water supply hose storage compartment.
5 Press the carry lock release button to unlock the iron from the iron platform (Fig. 9).
6 Press and hold the steam trigger to start ironing (Fig. 10).
7 For best ironing results, after ironing with steam, perform the last strokes without steam.
Warning: Never direct steam at people.
For more powerful steam, you can use the turbo steam mode.
1 Press and hold the on/off button for 5 seconds until the light turns white.
2 The appliance returns to normal steam mode automatically after 15 minutes to save energy.
3 Otherwise, to switch back to normal steam mode at any time, press and hold the on/off button for
2 seconds until the light turns blue again.
Steam boost function
Use the steam boost function to remove stubborn creases.
1 Press the steam trigger twice quickly (Fig. 11).
English
7