Message Settings; Sound Settings; Security; Service - JabloCom JabloPhone Manual Del Usuario

Outgoing calls
International calls
Internat. when abroad
Incoming calls
Incoming when abroad
Cancel all barring
• Caller ID restriction
Your phone number is usually displayed to the person you are calling.
To hide your phone number select o
The restriction does not apply to SMS. Some GSM networks do not allow canceling the caller identifica-
tion.

Message settings

SMS centre number
Message validity
Status reports
EN

Sound settings

Call ring
SMS alert
Keyboard sounds
Handset volume,
Handsfree volume
and Line volume

Security

PIN protection
Change PIN1
Auto PIN1
Change PIN2
Fixed dialling
All PIN manipulating functions displays number of remaining attempts (not available in all modifications)

Service

You can find additional information and set advanced parameters in the s
centre at www.jablocom.com.
• Firmware Version
Displays information about hardware and software versions of your phone and its IMEI number. You may be asked by
a service center or a hot-line service provider for this information.
• Code entry
You can control some specific features by entering a service code. The structure of the code is Xn, where "X" is a
function code and "n" is a value set.
Function
Showing a network name on the display
Automatic SMS erasing if memory full
Confirmation before sending a long text message (2 or more SMS)
Automatic start when AC is connected
Keyboard timing profile
Dialing tone profile
Activation of SIM tool kit application
• Factory Settings
You can restore the factory default settings of the phone by selecting this option. Select oK to confirm your choice.
GDP-04.i.ENG.MAN.User_Manual.15.B
- all outgoing calls will be barred
- all international outgoing calls will be barred
- international outgoing calls will be barred while roaming is active
- all incoming calls will be barred
- incoming calls will be barred while roaming is active
- cancel all types of call barring
for Caller ID restriction. To allow showing of your number, select o
n
- edits the number of your SMS message centre
- selects the period of time for which the network attempts to deliver your
message
- asks the network to send the delivery report about your messages
- sets the ring type Melody and Volume for incoming calls
- sets the Melody and Volume of new SMS alerts
- Choose Off, Soft or Loud sound
- each audio port's volume setting is selectable from 1 to 10. Separate settings are
possible for the Microphone, Speaker in call and Tones
- enables or disables the SIM card protection by PIN1
- changes the PIN1 password (4 to 8 digits)
- the phone can remember your PIN number. If the auto PIN function is enabled,
the phone will automatically enter the PIN number of your SIM card. If the SIM
card is removed from theGDP-04i, it remains PIN protected.
- changes the PIN1 password (4 to 8 digits)
- activation/deactivation of the fixed dialling numbers
- 10 -
menu. Find authorized service
ervice
Code / Value
N0 = Off
N1 = On
E0 = Off
E1 = On
S0 = do not ask
S1 = ask
A0 = Off
A1 = On
K0 = without autorepeat
K1 = with autorepeat
T0 = Continuous
T1 = Morse A
STK0 = STK disabled
STK1 = STK enabled
.
FF