Call Transfer; Call Register; Mute; Headset Mode - JabloCom JabloPhone Manual Del Usuario

#. Scroll to the desired participant and press the s
• To end the conference call, press

Call Transfer

The call transfer function allows you to forward the active call to another phone number.
During the incoming call, press the o
Enter the phone number directly and press
selection key. As soon as the call is answered, press the o
hang up as soon as the connection is established.

Call Register

The phone registers missed calls
going calls . There can be up to 100 calls stored in the memory. If
the memory is full, the oldest record of the same type is automatically
erased.
EN
To view the call history list, press
Additional functions are available under the o
stored number:
D
etails
c
all
s sms
enD
D
elete
s
tore number
D
elete all

Mute

You can mute your microphone during a call so that the other party does not hear you while you can hear the other
party.
Select o during the call and select m
Ptions
Select o and select u
Ptions

Headset Mode

If a headset is used for calling instead of the handset, we recommend switching into the special headset mode that
allows receiving and terminating calls without necessity to pick up the receiver.
For activating the headset mode go to the s
oK. For deactivating the headset mode enter heaD0 instead.
To receive an incoming call, press the green button or the SPACE bar in the headset mode. To terminate a call, press
the red button or the SPACE bar.

Phonebook

Every phonebook contact can include the following items:
• First Name and Last Name
• Mobile number
• Office number
• Home number
• Ring tone (a specific ring tone can be selected for this contact)
Up to 32 ASCII characters can be used for a First Name or Last Name. The total length of a
Name should not exceed 44 charters. Since UTF-8 coding is used for name storage, usage of
NON-ASCII specific characters will shorten the maxim length of the name. Up to 32 characters
(+,0,1,2,3,4,5,6,7,8,9,A,B,C,D,X,P,*,#) can be stored in each phone number memory position.
We recommend using the international format of the phone number to avoid problems with local area
codes.
GDP-04.i.ENG.MAN.User_Manual.15.B
.
selection key and then select h
Ptions
or select the contact from phonebook and then press the s
, incoming calls
.
menu for each
Ptions
- shows extended information about the call number, date, time, number of
attempts)
- the phone dials the selected number
- sends a text message to the selected number
- deletes the selected call record from the call history register
- saves the selected number in your phonebook
- deletes all call records from the call history register
to disconnect the microphone (both handset and hands-free).
ute
to re-activate the microphone.
nmute
-> s
ettings
selection key
elect
. This puts the calling party on hold.
olD
selection key and then select t
Ptions
and out-
-> c ... function. Enter heaD1 and press
ervice oDe entry
- 8 -
elect
. You can
ransFer