Publicidad
Idiomas disponibles
Idiomas disponibles
1 0 | Quick Start Guide | OBD 1150 |
en
Display Test
Used to check the display.
Keypad Test
Verifies that the keys are working correctly.
Memory Test
Checks RAM and Flash ROM.
Program Mode
Used for updating the Scan Tool.
Charging System Monitor
This function is used to monitor the voltage present on pin 16 of the
OBD II Data Link connector.
Acronyms
Allows the user to view acronyms and abbreviations used by the
Scan Tool.
Component Locator
Tool will display a list of components and their locations on the
vehicle. This function will always appear on the Main Menu. This
selection will appear on the Diagnostic Menu only when the tool has
a list of component locations for the currently selected vehicle.
575608 REV A | 02.2015
Bosch Automotive Service Solutions Inc.
Publicidad
