Workshop WS0450VA0 Manual Del Propietário página 11

Emptying the Drum
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
1 To remove the power head to empty
contents of the dust drum, simply lift
the two drum latches on the front and
rear of the Vac and lift the power head
up and off the dust drum and set to the
side.
Drum Latches
(2)
2 Set the power head upright in a clean,
dry area while emptying the drum.
3 Dump the drum contents into the proper
waste disposal container.
OPERATION (continued)
Blowing Feature
Your Wet/Dry Vac has the capability to be
used as a blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris. Raise the
right cover and install the locking end of
the hose into the blower port.
Blowing
Port
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended hours or when using in a
noisy area.
11
Right
Cover
Locking
End of
Hose