Descargar Imprimir esta página

Toolland DTB10002 Manual Del Usuario página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
7.
Troubleshooting
The appliance does not
start after being switched
The appliance does not
spray when the trigger is
8.
Care and Maintenance
Cleaning
Do not clean the appliance in the presence of naked flames.
Before doing any cleaning, remove any spraying agent from the tank, depressurize,
switch off the appliance and, if possible, remove the battery.
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
This appliance cannot be repaired and should be scrapped according to the local
environmental rules when damaged.
Storage
Remove any spraying agent from the tank before storing.
Store the appliance and its accessories in a clean and dry area.
Ensure that the appliance is stored in a safe place where unauthorised persons
cannot access it.
9.
Technical Specifications
battery ................................................................ Li-ion INR18650P 3.6 V, 2600 mAh
voltage............................................................................................................ 5 V
current .......................................................................................................... 0.8 A
charger ................................................................... 5 VDC, 2 A with micro USB plug
working time.............................................................................................120 min.
charging time............................................................................................240 min.
tank material ..................................................................................... PE - PP - ABS
lance material ................................................................................... stainless steel
flow ...................................................................................................... 0.3 L/min.
V. 01 – 25/03/2020
Problem
on.
pressed.
DTB10002
Possible cause
The battery is out of
power.
The power switch is
damaged.
The filter is clogged.
7
Possible solution
Fully charge the battery.
The appliance is damaged.
Please dispose of within
the local rules.
Take out the filter and
clean it.
©Velleman nv

Publicidad

loading