Signature Sleep 8169222COM Instrucciones De Montaje página 36

STEP 23
First, make sure that your unit
is still level in all directions.
Drill 1/8" (3mm) pilot holes through
the Upper Back Panel (J) and through
the Back Panel and Stringer (I) at the
stud locator marks.
Fasten the unit to the studs in the wall
with the Screws (7).
ameriwoodhome.com
7
(x4)
A ladder will be required
Do not lean against the
top of the unit, it may
cause sagging
36
J
BACK
PANEL
I