Publicidad
Operation
Attaching the Hauler to Your Tractor
1.
Remove the clevis pin and cotter pin from the tongue hitch.
See Figure 5-1.
2.
Carefully slide the tongue hitch onto the hitch bracket
on the back of your tractor and secure in place with the
hardware removed in Step 1. See Figure 5-1.
Dumping the Hauler
3.
The contents of the hauler can be dumped by pressing
down on the dump pedal on the tongue. See Figure 5-2.
1
4.
Raise the back of the hauler bed and push down on the
front of the bed until the bed bracket clicks into place.
10
Figure 5-1
2
Figure 5-2
Lowering the Tailgate
Pull up on the tailgate latches to lower the tailgate. See Figure
5-3.
Figure 5-3
Raising the Tailgate
Raise the tailgate and secure it into the up position by snapping
the tailgate latches back into place. See Figure 5-4.
Figure 5-4
5
Publicidad
