Publicidad
Idiomas disponibles
Idiomas disponibles
FREQUENCY
PERSONNEL
CHAP. 6. SELLING
Actuation of the directives 2002/95/CE, 2002/96/CE and 2003/108/CE, about the dangerous substances use reduction in
the electric and electronic equipment, as well as the refuse selling
The barred garbage symbol included on the machine shows the needs that the
machinery at the end of its useful life is sold in appropriate centers
The present machine rubbish collection at the end of its life is organized and managed from the producer. The user that will be
able to get rid of the present machine will have so to contact the producer and follow the new adopted system to allow the
equipment rubbish collection reached at the life end.
The adequate rubbish collection for the equipment successive starting dismissed to the recycling, to the treatment and to the
environmentally compatible selling contributes to prevent possible negative effects on the environment and on the health and
favors the reuse and/or material recycling of the equipment.
In the machine dangerous substances are not present.
The product unauthorized selling on behalf of the holder behaves the administrative sanctions
application foreseen from the actual standard.
CHAP. 7. MANUFACTURING MATERIALS
In accordance with the functioning and production requirements, the machine can be constituted with different typology of
manufacturing materials.
GROUP
Body and machine basin
Mouth discharge 10-18 Kg versions
Transparent superior cover
Flexible pipe of drinking water feeding
Discharge lateral door
Dross drawer and dross filter
Peeler dish
Mussels scraper dish
Detergent that contains CHLORINE (also if diluted) or its compounds as: the bleach, the muriatic
acid, products to clear the drain, products for the marble cleaning, in general decalcifying, etc ... can
attack the steel composition, staining and oxidizing it unavoidable. The only above described products
fumes can oxidize and in any case corrode the steel;
Steel wool, brushes or abrasive discs produced with other metals or alloys (ex. Common steel,
aluminum, brass, etc...) or tools that have previously cleaned other metals or alloys, that except to
scratch the surface.
Detergents in abrasive dust;
Fuel, solvents or inflammable and/or corrosive fluids;
Substances used to clean the silver.
Anodized
aluminum
●
MODALITY
MATERIALS TYPOLOGY
Stainless steel AISI 304
●
●
●
Plastic for foods
●
●
●
●
Pag.
di
17
16
Publicidad
