Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENT LIST
1.
AIRSPEED SELECTOR NOZZLE
2.
BLOWER TUBE
3.
ON/OFF SWITCH
4.
HANDLE
5.
BATTERY PACK RELEASE BUTTON *
6.
BATTERY PACK *
7.
MOTOR HOUSING
8.
NOZZLE RELEASE BUTTON
9.
WIDE NOZZLE *
10. BLOWER TUBE ADAPTOR *
* Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
WG543 WG543.1
Voltage
Maximum air volume
Maximum air velocity
Charging time
2 hrs (approx.)
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
ACCESSORIES
WG543
Battery pack
1 (WA3578)
Charger
1 (WA3881)
Wide nozzle
/
(WA4060)
Gutterpro kit
/
(WA4096)
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
20V Cordless Blower
WG543.9
20 V
Max.**
I: 305 cfm II: 410 cfm
(Air volume mode)
I: 95 mph II: 130 mph
(Air speed mode)
/
3.8 lbs
2.3 lbs
WG543.1
WG543.9
1 (WA3578)
/
1 (WA3881)
/
1
/
1
/
packaging, at a Worx dealer or on our website at www.
worx.com.
OPERATION
INTENDED USE
The blower is intended for residential use only. Use the
blower outdoors to move yard debris as needed.
ASSEMBLY AND OPERATION
ACTION
ASSEMBLY
Charging the battery pack
Your battery pack is UNCHARGED, you must
charge before use.
More details can be found in charger's
manual.
WARNING! The charger and battery
pack are specially designed to work
together, so do not attempt to use any other
devices. Never insert or allow metallic
objects into your charger or battery pack
connections because of an electrical failure
and hazard will occur.
Installing & removing the battery pack
NOTE: Press the battery release button to
release battery pack from your tool. After
recharging, insert the battery pack into
tool's battery port. A simple push and slight
pressure will be sufficient.
Air speed mode
NOTE: The blower is in the air speed mode
for default assembly.
NOTE: The blower has two working modes:
air speed mode and air volume mode. To
change modes, depress the nozzle release
button and slide backward for air speed
mode. Slide forward for air volume mode.
Choose a suitable mode according to your
work. Air speed mode is recommended
for cleaning in grass, as shown in Fig. I1.
While air volume mode is recommended for
cleaning on hard ground such as cement, as
shown in Fig. I2.
Air volume mode
Attach the wide nozzle
OPERATION
FIGURE
See Fig.
A1, A2
9
See Fig. B, C
See Fig. D
See Fig. E, F
See Fig.
G1-G4
EN
Publicidad
