Publicidad
Idiomas disponibles
Idiomas disponibles
Inserting/Removing the Battery
Always use genuine Panasonic batteries (DMW-BLK22: optional).
0
If you use other batteries, we cannot guarantee the quality of this product.
0
Use the battery after charging.
0
The Battery Grip can be used when the battery is inserted in either the digital
0
camera or the Battery Grip.
Check that the digital camera is turned off.
0
1
Slide the release lever of the
Battery Grip toward [OPEN], and
open the battery door.
2
Taking care of the orientation,
insert securely all the way until
you hear locking, and confirm
that the A lever is hooked to the
battery.
When removing the battery, push
0
the A lever toward the arrow and
pull out the battery.
3
Close the battery door and slide
the release lever toward [LOCK].
Note
When using the digital camera without the battery inserted, do not take out the
0
battery in the Battery Grip. Otherwise, the digital camera will turn off.
Remove the battery after use. (The battery will exhaust if it is left unused for
0
long period of time.)
The battery will be warm after using, while charging, and right after charging.
0
The Battery Grip will also be warm while using, but this is not a malfunction.
Confirm that there is no foreign matter on the battery door.
0
8
DVQX2100 (ENG)
Publicidad
