Publicidad
Idiomas disponibles
Idiomas disponibles
Double
tip
Battery
charger
Battery charge
1. Plug in the charger in a 120 V~power outlet. (Green
charging indicator light will turn on).
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should be on indicating the charge has initiated.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 ºF or higher than
113 °F Wait until the battery temperature is in the
adequate level to be able to charge it.
6
ENGLISH
Keyless
chuck
Battery
level
indicator
LED
light
Rotation direction
button
and switch lock
Charge
Battery
indicator
connection teeth
Parts
Torque
Speed
regulator
selector
Switch
Battery
release
button
Battery
Belt clip
Start Up
2
Handle
1
Publicidad
